First Week of November (Last Part)

As of November 1st we officially began to move into our new expanded facilities next door. Our landlord, Steve, has been nice enough to let us store our cases, shipping containers etc. over there for the last few months until the facilities were ready. The new facilities increased our square footage by about another 40%.

The expansion incudes a few more offices, a nice education/AV area with kitchen and restrooms, and in mid area a nice big fully climate controlled room for our upcoming coating facilities with large double doors to our current assembly area. The back of the area has been heated and cooled, but is currently used as a main storage area. During the buildout of our current area, we had the fore thought to put 800 Amps of 3 phase power in, so the new area has plenty of juice to keep us going.

I'll have to get some pictures up, but it's hard to believe that we first moved in to the current building in February of 2008. The building had a small kitchen, and a lobby. There were NO bathroom facilities. (We made friends with the neighbors very quickly ;). The first 2 Continuous Polishers were working in the kitchen area on very long extension cords. I had an electric heater on one wall and an air conditioner on the other, both fighting to keep the un-insulated room at +/-1 degree.

6 months later we were able to move out of the kitchen and populate the new building just in time for our open house..

14 months later we are still expanding and I am still working very hard to increase our capacity to meet the ever growing demand.